Flooring Adhesives
Products
Low Emission Carpet Adhesive
ARDEX AF 325
- Excellent early grab means that carpets can be installed in as little as 5 minutes
- Up to 30 minute extended working time
- High temperature resistance, suitable for use over underfloor heating systems
- Ideal for use with the double stick method, in conjunction with ARDEX AF 825 Tackifier
- Information
Information ARDEX AF 325
Designed to provide excellent early grab for immediate installation, ARDEX AF 325 Carpet Adhesive is ideal for installing all textile floorcoverings including fibre bonded, needle punch, latex and rubber foam backed, hessian, polypropylene, nylon, “action-bac”, felt and resin backed carpet.
- Excellent early grab means that carpets can be installed in as little as 5 minutes
- Up to 30 minute extended working time
- Rapid strength development
- High temperature resistance, suitable for use over underfloor heating systems
- Ideal for use with the double stick method, in conjunction with ARDEX AF 825 Tackifier
- Solvent free
- Low odour
Unit Size Available: 14kg
Coverage: Up to 35m2
- Technical Data
Technical Data ARDEX AF 325
Airing Time
The time the adhesive must be left open before
applying the floorcovering.
Between 5-10 minutes*.Working Time
The time in which the adhesive can receive
the floorcovering, after the initial airing time.
Up to 30 minutes*.Open Time
The combination of airing and working time.
Up to 35 minutes*.*depending on the absorbency of the subfloor
and ambient conditions. (20°C & 65% RH). - Downloads
- BIM Downloads
BIM Downloads ARDEX AF 325
Consumption Calculator ARDEX AF 325
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Select
Select
Select
The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Results
The number of kg required per square metre
Therefore: a kg unit will cover
m²
How many unit(s) will I need?
The number of kg unit(s) required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
