Uncoupling Matting & Adhesive
Products
Ready Mixed Uncoupling Matting Adhesive
ARDEX AF 200 PLUS
- Install matting in as little as 5 minutes
- Once matting is laid, tiling can start immediately
- Ready mixed & resealable
-
Information
ARDEX AF 200 PLUS minimises the time required to install uncoupling matting to timber, concrete and sand/cement screed subfloors, allowing tiling to commence immediately after the matting is laid. Unlike traditional powder adhesives, it has a high initial grab that prevents matting from curling for easy installation, is ready mixed and comes in a resealable container.
- Fix fleece-backed matting to timber, concrete and cement/sand screed subfloors without priming
- Matting can be fixed after 5-10 minutes or, due to its long tack time, up to an hour after application
- High grab formulation prevents curling of the mat for easy installation
- Once matting is installed, ARDITEX NA Ultra Rapid Setting Latex Levelling Compound or ARDEX Tile Adhesives can be applied immediately
- Cost-effective with up to 45m2 coverage from a single tub
- Ready mixed and resealable
- Suitable for floor applications
- Suitable for internal areas
- Suitable for use with underfloor heating
- Awarded EC1 PLUS EMICODE label for achieving low emission limits
Unit Size Available: 14kg & 6kg
-
Technical Data
Suitable for External Use or Wet Areas
NoSuitable for Use with Under Tile Heating
YesFix Matting Time
5-10 minutes, or within 1 hourCoverage
Approximately 45m2 per 14kg tub using a B1 or 2mm x 6mm v-notch trowel - Downloads
-
BIM Downloads
-
FAQ
-
Enquiry
Consumption Calculator ARDEX AF 200 PLUS
Select
Result
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of kg units required
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Select
Select
Select
The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Results
A kg unit will cover
m²
How many unit(s) will I need?
The number of kg unit(s) required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
