Water-Based Levelling and Smoothing Compounds
Products
Rapid Drying Industrial Topping and Wearing Surface
ARDEX K 71
- Rapid drying formula minimises downtime
- Excellent abrasion resistance
- Install from 3mm to 30mm neat, or up to 50mm incorporating aggragates
-
Information
ARDEX K 71 is a premium, self-levelling industrial floor compound engineered for upgrading and renovating both new and existing internal floors in light to heavy-duty applications. This versatile product serves as both a durable wearing surface and a reliable base layer, capable of receiving a wide range of surface finishes including suitable resin coatings, tiles, and natural stone. Whether hand-mixed for smaller areas or pump applied for larger projects, ARDEX K 71 offers exceptional durability and fast drying properties, making it ideal for use in commercial and industrial environments where fast turnaround times are essential.
Formulated with special cements, aggregates, and chemical admixtures, ARDEX K 71 provides a hard, smooth, and flat wearing surface that can withstand heavy wheeled traffic and offers excellent abrasion resistance. Its unique Rapidry Formula allows for fast-track installation, with the ability to receive foot traffic in as little as 2-3 hours and final floor coverings in as little as 24 hours, depending on application thickness.
ARDEX K 71 can be applied in thicknesses from 3-30mm neat, or up to 50mm when incorporating aggregates, providing flexibility for different levelling requirements. This industrial-grade floor compound is suitable for use in areas such as warehouses, factories, workshops, and also commercial areas where a durable and aesthetically pleasing finish is required.
- Rapid drying and hardening for quick turnaround times
- Excellent self-levelling properties for a smooth, flat finish
- High strength and wear resistance for long-lasting performance
- Suitable for light to heavy-duty industrial applications
- Can be left as a wear layer or used as a base for resin coatings
- Low shrinkage for reduced cracking and improved dimensional stability
- Pumpable for efficient large-area application
- Compatible with underfloor heating systems
Unit Size Available: 25kg
Coverage: A 25kg bag covers approximately 4.7m² at 3mm depth. When mixed with aggregates, coverage may vary. Please refer to the technical data sheet for detailed information on coverage rates for different application thicknesses and aggregate combinations.
-
Technical Data
Working time at 20°C
Approximately 25 minutesCompressive Strength
1 day 1 N/mm2
28 days 30 N/mm2Flexural Strength in accordance with EN 196
1 day 3.0 N/mm2
28 days 7.0 N/mm2Ball Pressure Hardness
1 day 60 N/mm2
7 days 65 N/mm2
28 days 90 N/mm2Abrasion Resistance
The abrasion resistance of ARDEX K 71, when measured in accordance with BS 8204, was rated as at least AR0.5.Resistance to chair castors
Yes
Suitable for underfloor heating
Yes
Bulk density
Approx. 1.4kg/litreWeight of fresh mortar
approx. 2.1kg/litreWalkability at 20°C
After approx. 2 hoursReady to receive floorings and coatings under good conditions at 20°C
Up to 10mm – After 12 hours
10 – 20mm – After 24 hours
20 – 50mm – After 48 hoursReaction to fire rating
A1 - Downloads
-
Enquiry
Consumption Calculator ARDEX K 71
Select
Result
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of kg units required
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Select
Select
Select
The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Results
A kg unit will cover
m²
How many unit(s) will I need?
The number of kg unit(s) required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
