Repair Mortars
Products
ARDEX A 950
High Build Repair Mortar
- Tile in as little as 90 minutes
- Apply from 2mm to 100mm
- Shrinkage free
-
Information
ARDEX A 950 is a multi-purpose rapid-drying, deep-fill renovation compound that can be tiled over in as little as 90 minutes, and receive all finishes, including paint, after 24 hours. It can be used to reshape and repair walls and floors with high-build applications of up to 100mm, and will harden in as little as 1 hour, regardless of thickness.
- Can receive finishes, including paint, after 24 hours regardless of thickness
- Can be tiled in as little as 90 minutes
- Ideal for general building work, smoothing, repairing and levelling of walls and filling large cavities and deep holes around door frames, boxing in pipework, making columns and pedestals.
- Can facilitate “dot and dab” fixing of plasterboard
- Can be used as a modelling mortar to smooth and shape before drying with stencils to create architectural features, such as columns and pedestals
- Low-tension, shrinkage compensated, even in thick layers
- Slump free, apply from 2mm to 100mm
Unit Size Available: 20kg
Coverage: Approximately 6m2 at 3mm thick per 20kg bag.
-
Technical Data
Mixing ratio:
Approx. 6 litres of water: 20kg powder is equivalent to approx. 1 part water to: 3 parts powder by volume.Bulk density
Approx. 1.1kg/litresWeight of fresh mortar
Approx. 1.4kg/litresMaterial requirement
Approx. 1.1kg powder per m²/mmWorking time at 20ºC
Approx. 30-40 minutespH value of freshly mixed mortar containing cement
Approx. 12pH value of set filling layer
Approx. 10COMPRESSIVE STRENGTH
After 1 day Approx. 6 N/mm²
After 7 days Approx. 10 N/mm²
After 28 days Approx. 12 N/mm²TENSILE BENDING STRENGTH
After 1 day Approx. 2 N/mm²
After 7 days Approx. 3 N/mm²
After 28 days Approx. 4 N/mm² - Downloads
-
FAQ
-
Enquiry
Consumption Calculator High Build Repair Mortar
Select
Result
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of kg units required
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Select
Select
Select
The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Results
A kg unit will cover
m²
How many unit(s) will I need?
The number of kg unit(s) required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
